How to scan only specific addresses in each network range

Started by Jack

Jack

How to scan only specific addresses in each network range 31 October 2022, 11:31

I wanted to perform scanning of specific IP addresses in each range. For example, there are 5 IP ranges:
192.168.0.0/24
192.168.1.0/24
192.168.3.0/24
192.168.4.0/24
192.168.5.0/24
And I want to scan only 0.1, 0.2 and 0.255, i.e. total 3 IP addresses in each range.

I tried this by setting following:
From 192.168.0.1
To 192.168.5.1
But it's not working the way I need: scan just 1 IP in all 5 ranges.

Great if you could let me know if there is a solution. If not, can this be a part of feature release where I can define a specific IP addresses to scan and it will scan only those IPs in all the subnets.

Thanks.

Reply Quote

Ann

Re: How to scan only specific addresses in each network range 31 October 2022, 12:02

Admin
Registered: 10 years ago
Posts: 889

Yes, that's easily possible via using the non-contiguous mode. You can simply enter two ranges and enable that mode. Network Scanner manual has a section in the "IP address range and automatic detection of network configuration" chapter explaining in detail how the non-contiguous mode works.

Also, in order to scan .0 and .255 addresses, please tick "Ping network and broadcast addresses" under Options - General.

SoftPerfect support forum

Reply Quote

Print view of this page

Reply to this topic

Sometimes you can find a solution faster if you try the forum search, have a look at the knowledge base, or check the software user manual to see if your question has already been answered.

Our forum rules are simple:

Be polite.
Do not spam.
Write in English. If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

Disable BBcode in this message Disable smileys in this message

Help information

Spam prevention: please enter the following code in the input field below.

 ********   *******   ********  **     **  ******** 
 **        **     **  **        **     **  **    ** 
 **               **  **        **     **      **   
 ******     *******   ******    *********     **    
 **               **  **        **     **    **     
 **        **     **  **        **     **    **     
 ********   *******   ********  **     **    **

Enter the code:

Message:

How to scan only specific addresses in each network range

Reply to this topic

Software Products

Online Store

Help & Support

Download

SoftPerfect