I've done this three times with identical results. I install Windows 10 Pro onto my Samsung 950 Pro 256GB SSD in the M.2 slot. Once it's installed and activated, I first install the Ramdrive and set it up proper. I can reboot and install stuff and everything works perfectly as expected. I then power up my 3 HDD that are in a RAID 5. As soon as I power my SATA HDD's and burner, I get a BSOD right after a second or two of the login screen for windows 10. It says "PAGE_FAULT_IN_NONPAGED_AREA spvve.sys" As soon as I unplug the HDD's, the problem goes away. As soon as I uninstall the Ramdrive software, my RAID comes into windows 10 as expected and all is well. I first thought it was the new motherboard but when I googled "PAGE_FAULT_IN_NONPAGED_AREA spvve.sys" SoftPefect's RamDrive software was the first hit so I figured I'd uninstall it to see. Sure enough.
I'm just going to move forward and install a different RamDrive software as much as I love this one. Just posting this in case anyone has the same problem.
Here are my specs:
Asrock Z170 Pro4S w/ 2.2 bios
2 X F4-2133C15D-16GRR
EVGA GeForce GTX 960 04G-P4-3969-KR 4GB FTW GAMIN
Samsung 950 Pro 256Gb M.2, PH3500U-1I72 X 3 (in raid 5)
SeaSonic X-1250 ( SS-1250XM2 ) 1250W
I had the same problem add new hard drive to mine system. The problem i think was the system gave the same drive letter ( drive E: ) to the new hard as the one setup for ramdisk to make. To fix on my system i disconnect the new hard drive. boot. change the drive letter for the ram drive to a upper end ( like V: ). shut down. add hard back. i had no problem after that.