Lab test environment

Started by Dennis

Dennis

Lab test environment   13 November 2012, 20:00

Sup folks

I've been looking for a product to emulate a WAN for quite some time now and I've seen many expensive hardware solutions and some software products that were way more expensive than yours.
I like your product. It looks easy to use but functional and might be the one I was looking for. But before I go to my boss and yell at him "BUY THIS!" I wanted to clarify that your product can do what we want.

We want to set up a test environment in our lab to test software AND hardware products. The way I was thinking about is setting up a server with two network cards and then using your product on the server to regulate the traffic.
For example..
Server A (with emulator) - Firewall - Switch - 2 Clients
Would both of these clients be infected by high latency or packet loss or whatever I set up in the emulator?

Kind Regards


...and why the hell is the icon for the network scanner a football/soccer ball??? laugh
SoftPerfect Support forum - Andrew avatar image

Re: lab test environment   14 November 2012, 17:11

In this scenario, it depends on how you stream your data.

If it's between the server and either of the clients, you don't need two NICs. Just install the CE software on the server and it will affect all communications between the server and the clients.

If however you want to affect traffic between the two clients, then yes you will need two NICs in the server, bridged with CE tools and each NIC connected to the respective client. You can think of CE as of a filter or firewall, where it affects traffic through a NIC on the computer it's installed on.

P.S. I don't remember how the soccer ball icon in the network scanner once was chosen. I guess just an icon that didn't mean anything and was fairly unique. Some people even said they hated it, although they could hardly suggest a worthy replacement. Now there are hundreds of thousands of copies of the application , and I guess the soccer ball icon is to stay as people have got used to it smile
Dennis

labor test environment   14 November 2012, 18:05

Hi Andrew

Thank you for replying to my issue.

You've said that I need two NICs and each of them connected to the client. This confuses me a bit. Does the client then need two NICs too?
This way I could only affect one client each server and would be kinda bad for me. I want to affect a whole network with some clients and some hardware products like a switch or a firewall or a phone. Is that possible? I was talking to someone offering a boxed product for around 5000$ and he told me that there would be a way to do it with software but he was mumbling something about server and two NICs and saying it would be difficult blabla because he wanted me to buy the ridicilous expensive box.

labor test environment   15 November 2012, 02:14

To make want I want more clear here a little picture I'm very proud I made it myself :P with paint
Attachments:
open | download – CE Build.png (26.5 KB)
SoftPerfect Support forum - Andrew avatar image

labor test environment   15 November 2012, 12:19

Sorry, I misunderstood your requirements.

The scenario as in your diagram, can easily be implemented by getting a server with two NICs, one connected to the WAN, the other one to the LAN switch.

Then you need to decide, how the server is to forward traffic between NIC1 and NIC2.

I recommend to either enable Internet Connection Sharing if you are using a client OS like Windows XP, or the RRAS service, if you are using a server edition of Windows.

Once you have got the server (host computer) up and running and your clients and hardware are able to access the WAN, then you can install CE and simulate losses, delays, etc. Once again, it will only affect the traffic between the WAN and LAN, not within the LAN.

labor test environment   15 November 2012, 19:05

hey

It's a hard birth but it looks like we're getting there smile
I now understand what you mean with the traffic within the LAN is noc affected and that's okay to me. How could anyone emulate a hard network problem like that^^

Kind of my last question for now just to make sure everything is clear. This way other devices (faxes, scanners, phones) wont get affected by the packet loss, delay or whatever right? Or can I set them the server with the two NICs as gateway or something so they have bad connection? smile

Great support here even for the maybe-customers! Thanks a lot
SoftPerfect Support forum - Andrew avatar image

labor test environment   15 November 2012, 19:58

Any device of computer whose traffic flows through the server with CE on it will be affected.

Any local communications, that is those not flowing through the server will not be affected.

lab test environment   15 November 2012, 20:36

I guess that's a no to faxes and phones.

Sometimes you can get the answer faster if you try the forum search and/or have a look at the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • If possible, check your spelling and grammar.

Author:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

  *******   ********   ********  **     **  ********  
 **     **  **     **     **     **     **  **     ** 
        **  **     **     **     **     **  **     ** 
  *******   ********      **     *********  ********  
        **  **            **     **     **  **        
 **     **  **            **     **     **  **        
  *******   **            **     **     **  **        

Message: