Different transfer rate for Up/Down

Started by nfaughnan

nfaughnan

Different transfer rate for Up/Down   10 November 2015, 04:01

On the Transfer Rate tab, there is radio buttons to select the Traffic Direction, with an associated speed limit.

Is it possible to have a different Speed Limit for Incoming and Outgoing traffic? The design suggests not.
SoftPerfect Support forum - Andrew avatar image

Re: Different transfer rate for Up/Down   10 November 2015, 11:31

It is possible.
Just click the [...] button under Speed Limit and define a new rate, putting a colon between two values, e.g. 100000:50000, with "Traffic Direction" set to "Both"

SoftPerfect support forum
nfaughnan

Re: Different transfer rate for Up/Down   10 November 2015, 20:17

Sorry I wasn't clear my original post. I require a different upload speed AND a different download speed. I require them to be unique. Is this possible?
I did some testing, and it seems my request is impossible with your software.
SoftPerfect Support forum - Andrew avatar image

Re: Different transfer rate for Up/Down   10 November 2015, 21:48

I understood you wink This is exactly what you are asking about. Please set Traffic Direction to Both and add a rate as shown above. The first number (before colon) is the max incoming rate, the second number (after colon) is the max outgoing rate.

For example, if you want a 100 Kbps limit on downloads and 50 Kbps limit on uploads, you'd enter 100000:50000.
nfaughnan

Re: Different transfer rate for Up/Down   10 November 2015, 21:54

Oh my apologies. I see now. Thanks.

Sometimes you can get the answer faster if you try the forum search and/or have a look at the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

  ******    **     **  **    **  **    **  **     ** 
 **    **   ***   ***  ***   **   **  **    **   **  
 **         **** ****  ****  **    ****      ** **   
 **   ****  ** *** **  ** ** **     **        ***    
 **    **   **     **  **  ****     **       ** **   
 **    **   **     **  **   ***     **      **   **  
  ******    **     **  **    **     **     **     ** 

Message: