How to limit a LAN Speed for IP range
Started by Hassam
How to limit a LAN Speed for IP range 27 October 2010, 15:05
go to (LAN) tab, and make ( Ignore LAN traffic ) unchecked.
2- Make this Rule :
-Direction = Out
- Transfer Rate = 5240000 Bytes/s
-Protocol = TCP/UDP
- Interface= LAN or u can use "Any interface"
- Source = Local
- Source Ports = list = 139 , 445 ( to limit file sharing, and this is what I expected from your question! )
- Destination = Whole IP range = Your IP range you want to limit
- Source Ports = ANY
This rule should limit file sharing transfer when a user within that IP range try to copy a shared files on BWM machine..
but 'll NOT limit the BWM machine when it copy files from this IP range PCs.
you can customize it to your needs..
I hop I understood what you want to achieve.
Limit a Lan Speed 05 November 2010, 04:51
want to blocl/ unlimited speed for perticular website!! 05 November 2010, 05:30
i want to blocl/ unlimited speed for particular website!!
You can do this, ( if ) you want to block/unlimit FEW sites and there server IP address is static, or at least this site use a limited range of IPs. and you'll now why later. ( *** )
consider a site like ( www.site.com ) has an IP address = 18.104.22.168
and it has another server, holding it's images , files , itc = 22.214.171.124
do this rule :
-Direction = Both - Transfer Rate = Unlimited -Protocol = TCP/UDP - Interface= LAN - Source = Single local IP or IP range of computers in your LAN. (for ex. 10.0.0.15 - 10.0.0.30 ) - Source Ports = ANY - Destination = IP address of site server ( for ex. 126.96.36.199 ) or ... address group ( * ) - Source Ports = (ANY) or ( 80 ) for browsing and most downloads or customize for your needs!
( * )
You can created an address group list ( known as "IP/MAC groups" ) for sites( servers IPs ) you want to unlimited.
so you can add in this list for example ( 188.8.131.52 + 184.108.40.206 + etc )
and in Source options , choose ( Group ) and you 'll find your list there.
( *** )
This work for limited sites, OR if you have the patient, you can add many servers IPs you want, ( for me I don't have this patient )
and you have to consider that some or many sites have several IP addresses for their Domain name, and these IPs changes frequently. I mean 1 site has several IPs
for so long time,, I requested this feature from Andrew ( make BWM works on Domain names, NOT only IP address and mac address )
I asked for this feature to do what you want to do ( limit / unlimit ) certain Domains. and I don't know if we 'll find this feature in the upcoming version 3 ,, or even if we 'll see version 3 alive soon !!!
ThankuUUUUU. 05 November 2010, 17:17