Running Bandwidth Manager under VMware

Started by Karnage

Karnage

Running Bandwidth Manager under VMware 15 May 2015, 12:25

Registered: 13 years ago
Posts: 8

Has anyone had experience with running Bandwidth Manager under vmware?

I have installed BWM on a windows 8.1 virtual machine and am running it in bridge mode. The vmware ESXi server has 2 NICs and 2 virtual switches setup. vSwitch0 is connected to vmNIC0 & vSwitch1 is connected to vmNIC1. The Win 8.1 VM has 2 NICs with 1 connected to vSwitch0 & the other connected to vSwitch1. BWM is then set to bridge these to NICs with a "allow all" rule. Everything is running in the same IP range. See image below. Unfortunately nothing is being passed through.

I know this is a bit of an unusual question but was hoping someone out there had run BWM under vmware and got it working.

SoftPerfect support forum

Reply Quote

Andrew

Re: Running Bandwidth Manager under VMware 15 May 2015, 13:19

Admin
Registered: 18 years ago
Posts: 3 518

This sounds like you need to enable Promiscuous Mode on the VMWare NICs and/or the switch. The bridging requires the NICs to operate in this mode to work.

Reply Quote

Karnage

Re: Running Bandwidth Manager under VMware 15 May 2015, 14:12

Registered: 13 years ago
Posts: 8

Thank you VERY much Andrew!

I have spent hours on this and after setting Promiscuous mode on both vSwitches it now allows bridging to work. Great work!

You have really helped me a lot and I really appreciate the help especially when it wasn't a actual problem with your product.

Reply Quote

Print view of this page

Reply to this topic

Sometimes you can find a solution faster if you try the forum search, have a look at the knowledge base, or check the software user manual to see if your question has already been answered.

Our forum rules are simple:

Be polite.
Do not spam.
Write in English. If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

Disable BBcode in this message Disable smileys in this message

Help information

Spam prevention: please enter the following code in the input field below.

 **    **   *******   **    **  **     **   ******   
 ***   **  **     **  ***   **  ***   ***  **    **  
 ****  **  **         ****  **  **** ****  **        
 ** ** **  ********   ** ** **  ** *** **  **   **** 
 **  ****  **     **  **  ****  **     **  **    **  
 **   ***  **     **  **   ***  **     **  **    **  
 **    **   *******   **    **  **     **   ******

Enter the code:

Message:

Running Bandwidth Manager under VMware

Reply to this topic

Software Products

Online Store

Help & Support

Download

SoftPerfect