IP dinamic

Started by ilus


IP dinamic   29 November 2005, 08:05

my network this distributed of the following form: cable moden - switch - 5 computers
this computer have ip dinamics, in one of them installs the GUI and in the others the servant when attempt to connect me to a remote servant appears error 10060, to that must this. another one pregutna; in where I create the rules, in localhost or first I connect each servant and I create its rules? thanks
SoftPerfect Support forum - Andrew avatar image

Re: ip dinamic   29 November 2005, 09:33

You should connect to each PC and make some rules. This error #10060 usually indicates a problem with firewall. The firewall either on the machine with GUI or on the machines with the service prohibits the network connection from the GUI to the service. The manager uses ports 8701 and 8702, protocol TCP.

Re: ip dinamic   29 November 2005, 11:12

that type of rules I must create, if I need to distribute 128kbs to each computer? as I register them, from localhost?
SoftPerfect Support forum - Andrew avatar image

Re: ip dinamic   29 November 2005, 18:55

It is like Example #3 from the user's manual:

Example 3: You have a network connected to the Internet through a hardware router or a DSL modem. You would like to limit internet access speed for some or all users but you do not need to limit traffic within your LAN.

In this case, you need to install the SoftPerfect Bandwidth Manager service on each network computer on which you would like to set an internet speed limit. Only the system service needs to be installed on each network computer. You will be able to set up the system services remotely via the GUI application installed on a single workstation. If your network IP address range is 192.168.0.x, your rules might be as follows:

Rule #1: Protocol: TCP/UDP, Source: Range -, Destination: Range -, Unlimited.
Rule #2: Protocol: TCP/UDP, Source: local host, Destination: Any IP address.

The first rule permits unlimited access to the LAN while the second sets an internet access speed limit.

Re: ip dinamic   30 November 2005, 09:05

that is my problem I do not have ips fixed are dimanicas

example: me when entar to software I connect myself to localhost, depsues I create the rules these rules are been worth for all the computers? without mattering that it creates them astando connected in localhost?

Sometimes you can get the answer faster if you try the forum search and/or have a look at the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • If possible, check your spelling and grammar.




A brief and informative title for your message, approximately 4–8 words:


Spam prevention: please enter the following code in the input field below.

       **  **     **   *******    *******   **     ** 
       **  **     **  **     **  **     **  **     ** 
       **  **     **  **                **  **     ** 
       **  **     **  ********    *******   ********* 
 **    **   **   **   **     **         **  **     ** 
 **    **    ** **    **     **  **     **  **     ** 
  ******      ***      *******    *******   **     **