SoftPerfect Bandwidth Manager

Bridging WiFi and LAN adapters

Started by Andrey Drujinin

Andrey Drujinin

Bridging WiFi and LAN adapters   26 June 2015, 00:44

Please help with bridging.
I want to bridge wi-fi and lan adapter. If I use windows bridging, my LAN clients receiving IP, gateway and DNS via 4G router DHCP and use Internet. If I use SoftPerfect internal bridging DHCP doesn't work, and manual IP settings don't work.

My net config:
4g wi-fi router(ip 192.168.0.1 mask 255.255.255.0)
netbook with wi-fi adapter(ip 192.168.0.142 via router DHCP)
and LAN card (IP and DNS auto)
I want bridge this two NIC and plug wi-fi router 2 into LAN NIC
SoftPerfect Support forum - Andrew avatar image

Re: Bridging WiFi and LAN adapters   26 June 2015, 09:37

Unfortunately the internal bridging doesn't support joining a WiFi and a wired connection.

However if you are running Windows 8, I can provide a test build of the BM software that supports the Windows bridging, so it may work.

Sometimes you can get the answer faster if you try the forum search and/or have a look at the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

 **     **  **      **  **     **  **    **  **      ** 
 ***   ***  **  **  **   **   **   ***   **  **  **  ** 
 **** ****  **  **  **    ** **    ****  **  **  **  ** 
 ** *** **  **  **  **     ***     ** ** **  **  **  ** 
 **     **  **  **  **    ** **    **  ****  **  **  ** 
 **     **  **  **  **   **   **   **   ***  **  **  ** 
 **     **   ***  ***   **     **  **    **   ***  ***  

Message: