Hi...
I have very slow wireless network file transfer, my SPBM configure as follows:
ADSL modem> Cable 5e> SPBM bridge between external and internal NIC> Cable 5e> AP> Client devices
When I try to ignore LAN traffic, it gives me an error and some clients lose the connection. How I make my wireless network file transfer faster?
Thanks
SoftPerfect Bandwidth Manager
"Ignore LAN traffic" conflict with bridge
Started by lmpzkt
"Ignore LAN traffic" conflict with bridge 03 September 2015, 18:05 |
Registered: 17 years ago Posts: 14 |
Re: "Ignore LAN traffic" conflict with bridge 03 September 2015, 19:14 |
Admin Registered: 18 years ago Posts: 3 518 |
Re: Ignore lan traffic conflict with bridge 03 September 2015, 22:37 |
Registered: 17 years ago Posts: 14 |
Re: Ignore lan traffic conflict with bridge 03 September 2015, 23:53 |
Admin Registered: 18 years ago Posts: 3 518 |
Client-to-client transfers should not be affected as their traffic never reaches BM, however BM-Client may be slower if their speed is shaped by your rules.
Try adding the following rule in the beginning of the ruleset:
Try adding the following rule in the beginning of the ruleset:
Rate: Unlimited Protocol: IPv4 based Source: x.x.x.x-y.y.y.y Destination: x.x.x.x-y.y.y.y Interface: LAN NICWhere x.x.x.x-y.y.y.y is your LAN IP address range. This should handle local traffic before any other rules and improve the transfer speed.