Bandwidth manager of a Linux gateway

Started by Carlos

Carlos

Bandwidth manager of a Linux gateway   01 April 2006, 02:51

I need to work with the bridge mode of Bandwidth Manager. Must I assign an IP address in each network adapter? If I don't assign it, windows show null connectivity message.

My OS is Windows 2003 Server and acts only as Bandwidth manager of a Linux gateway.
SoftPerfect Support forum - Andrew avatar image

Re: Network adapter config   01 April 2006, 03:32

Assign any IP addresses from the local range. For example, if you network uses 192.168.0.x addressing then assign any unused IP addresses from the LAN range (e.g. 192.168.0.100 and 192.168.0.101) to these interfaces.

Sometimes you can get the answer faster if you try the forum search and/or have a look at the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

 **     **  **     **  ********   **    **  **     ** 
 ***   ***   **   **   **     **  **   **   **     ** 
 **** ****    ** **    **     **  **  **    **     ** 
 ** *** **     ***     ********   *****     ********* 
 **     **    ** **    **         **  **    **     ** 
 **     **   **   **   **         **   **   **     ** 
 **     **  **     **  **         **    **  **     ** 

Message: