Show all posts by user

Re: Scan results data is not saved to CSV

1 year ago, by Andrew in Network Scanner Forum

It sounds like you may be choosing All items when saving, rather than Visible Items. In that case hidden rows will be included as well (those that you have filtered out, which are probably the ones that contain errors). We have also added a Columns button in the latest builds, so you can choose which columns go to CSV, text and HTML, without having to hide them manually.

Re: Suggestion: Add maximum upload and download speed to the reports

1 year ago, by Andrew in NetWorx Forum

No one else has expressed their interest in this feature (and frankly this is what we expected). As we aim to keep NetWorx as simple as possible, I am afraid at this stage there is no plan to implement it.

Re: Scan results data is not saved to CSV

1 year ago, by Andrew in Network Scanner Forum

These look like VBScript errors, which is strange because the scripts are only executed during scanning. Are you saying that the displayed data are correct, but they are wrong when saved to a CSV file? Can you post some screenshots?

Re: Image header is corrupted or not accessible (error C0000098)

1 year ago, by Andrew in RAM Disk Forum

There are two identical 4KB headers: a primary header in the beginning of the file and a backup header in the end of the file. Try a third-party disk mount utility that supports entering an offset, like OSFMount v2 (see under Downloads/Previous version). You need to enter the offset of 4096 bytes as shown below to the data when mounting the image file. An image file is essentially a 4K header

Re: Connection Emulator and Jenkins Agent

1 year ago, by Andrew in Connection Emulator Forum

I am not familiar with Jenkins, but it sounds like some of the parameters you set also affect Jenkins' own connection. Let's say if you have enabled packet loss and high latency, it will apply to every connection from and to the machine where the emulator is installed. Perhaps try setting up a filter in the emulator, so that it only affects the tested application(s) rather than every connectio

Re: Suggestion: Database treatment upon uninstallation

1 year ago, by Andrew in NetWorx Forum

Good point, we will add a prompt like this in the next release. It will pop up at the end of uninstallation:

Re: Using column values in RegEx

1 year ago, by Andrew in Network Scanner Forum

Please post here the complete scripts and regex-es you are using. Or submit a support ticket and attach your entire config file (you can strip out all sensitive information like passwords). We will definitely check what's happening there.

Re: Can't update MAC-address database

1 year ago, by Andrew in Network Scanner Forum

Thank you, that's a good point. We have mirrored the file on our web-site where should be accessible 24/7. The new release will have the new link embedded and the file will be updated every month.

Re: Hidden columns become visible after editing

1 year ago, by Andrew in Network Scanner Forum

Thanks, that's indeed a bug. The new builds should resolve this issue.

Re: Bluescreen after installing version 4.0.9

1 year ago, by Andrew in RAM Disk Forum

Quoterocket777 I would like to make one last suggestion (I promise) : to have a setting to disable the threading code that's been added recently. If I do get another crash, I could then check if that makes a difference. If you are referring to the change in version 4.0.9 mentioned in the changelog as "Improved: up to 2x performance increase in multithreaded I/O", then please try vers

Re: Bridge mode for VMware Windows 8

1 year ago, by Andrew in Network Scanner Forum

That's great - I am glad it's all working now.

Re: Bluescreen after installing version 4.0.9

1 year ago, by Andrew in RAM Disk Forum

@rocket777 Sorry we are unable to determine the cause of your crash. We went through the crash dump again and even narrowed it to the line of code, but there is nothing suspicious there. It's a regular pointer cast to check some RAM disk's internal flags. The only way it can possibly crash is if something is wrong with that memory location. Like you suggested above, there may be a compatibi

Re: Bluescreen after installing version 4.0.9

1 year ago, by Andrew in RAM Disk Forum

We use WinDbg for analysis, you can install it as a component of the Microsoft debugging tools. To see the full analysis enter the !analyze -v command. In Prime 95 you don't need to join any online program, simply choose the Just stress testing option and then Blend. By the way, even if the old version works okay (it may simply not encounter the existing hardware fault due to the difference

Re: Bluescreen after installing version 4.0.9

1 year ago, by Andrew in RAM Disk Forum

You are right, the crash took place in one of the RAM Disk drivers, but it seems the underlying cause is faulty RAM. Here is a bit of info from the minidump: Quote MODULE_NAME: hardware IMAGE_NAME: hardware_ram *** Memory manager detected 60171 instance(s) of page corruption, target is likely to have memory corruption. Try Windows Memory Diagnostic, following by Memtest86+ or Prime 95. Pr

Re: Upgrade from version 3.4.7

1 year ago, by Andrew in RAM Disk Forum

The best way to upgrade to the latest version from 3.4.7 and get a free trial would be as follows: Temporarily reassign your temporary folders to a hard disk location, i.e. C:\temp. Backup your disk definitions via File - Export Disks. Uninstall the currently installed (old) version and reboot. If you have any issues with incomplete uninstallation, see this page. Install the latest version d

Re: BitComet traffic is not recorded when "Ignore LAN traffic" is checked

1 year ago, by Andrew in NetWorx Forum

Generally it should not matter what router is used or what you are connected to. The TDI/WFP drivers work at a higher level in the system. Try uninstalling NetWorx and then reinstall it with the TDI driver instead. Microsoft started deprecating TDI only in Windows 8, so chances are it will work fine on Windows 7. If it still does not, I am afraid we can't help you with this specific issue give

Re: Feature request: Quick filter for Options

1 year ago, by Andrew in Network Scanner Forum

Update: a quick filter has been added under Application Variables:

Re: How to change database location

1 year ago, by Andrew in NetWorx Forum

Once you change the Database location parameter in NetWorx, it will instruct you what to do next. It's quite simple:

Re: Feature request: Quick filter for Options

1 year ago, by Andrew in Network Scanner Forum

Sure, these new builds include quick filters under the bookmarks management window, friendly names and display filters. We'll add it where the global variables are defined a bit later, as that code requires additional reworking.

Re: BitComet traffic is not recorded when "Ignore LAN traffic" is checked

1 year ago, by Andrew in NetWorx Forum

Sorry it seems to work fine here, even on Windows 7 32-bit, as you can see below. I am not sure what could be causing the issue for you, but given the vanishingly small market share of 32-bit instances of Windows 7, we probably will not be able to justify chasing it.

Re: BitComet traffic is not recorded when "Ignore LAN traffic" is checked

1 year ago, by Andrew in NetWorx Forum

Sorry this is not reproducible. See the screen shot below: it shows that the correct data usage and speed were recorded. Please make sure you are using the latest NetWorx version and the WFP driver (not TDI).

Re: How to get RAM disk in Windows "Resource Monitor"

1 year ago, by Andrew in RAM Disk Forum

Yes, that's pretty much it: With the HDD emulation option off, a RAM disk is a standalone volume (like a USB flash drive) and it's not available under Performance Monitor or Disk Management. With the HDD emulation option on, a complete disk with partitions is emulated and thus can be accessed in many Windows tools.

Re: Additional cache folders

1 year ago, by Andrew in RAM Disk Forum

You are right, the Cache Relocator utility only moves the page cache that contains HTML, CSS, images and scripts from web-pages. Like you pointed out, there are other cache folders, e.g. GPUCache and Code Cache, but the amount of data in those seems small, and it is unclear whether anything could break if they are relocated. It's of course OK to try moving other folders, if you are an expe

Re: Import rules from BWM v2.9.10 to the new BWM v3.2.9

1 year ago, by Andrew in Bandwidth Manager Forum

We can convert the rules for you from the old .XML to the new .DB format. However, due to the differences between the versions some objects will not be carried over, namely bridges and usage records will not be converted. If you would like us to that, please submit a ticket and attach your XML file. Alternatively you can recreate your ruleset from scratch as it's now possible to have a more co

Re: Free NetWorx 5.5.5 slows my Internet after the latest Windows update

1 year ago, by Andrew in NetWorx Forum

It is probably because you have the Ignore local traffic within the LAN option on. In this mode all data is processed by a special driver that filters out LAN traffic. You can either turn this option off, or try the latest NetWorx version (which is free trial for 30 days) as the driver received a number of updates during the years since version 5.5.5. If you do decide to try the latest versio

Re: Enhancing multi-clause filters

1 year ago, by Andrew in Network Scanner Forum

Update: we have reworked the filters, and multi-clause filters are now fully supported. They will also display nicely one per each line, as shown below. You can download the latest preliminary builds in try it. We will also add a way to edit stored filters shortly.

Re: App downloaded from Apple App Store doesn't seem to work anymore

1 year ago, by Andrew in WiFi Guard Forum

Thank you for confirming the issue, we will investigate this further. Unfortunately, it is hard to estimate the time frame and the outcome, as Apple can be quite slow and unhelpful in resolving such matters. So, if you need WiFi Guard urgently, please let us know and we'll issue a temporary licence key for the DMG version for you.

Re: VLAN info Alactel 6400

1 year ago, by Andrew in Switch Port Mapper Forum

I guess the switch either doesn't provide VLAN information in its SNMP tables, or it does so in a way the Port Mapper doesn't understand (we support two locations: vmMembershipEntry and dot1qVlanCurrentEntry). If you could run the snmpwalk tool against your switch, open a support ticket and attach the snmpwalk's output, we may be able to see what happens there and advise further. We have al

Re: Feature request: Quick filter for Options

1 year ago, by Andrew in Network Scanner Forum

Thanks, indeed there were a few minor bugs. Please try the new builds published today.

Re: Enhancing multi-clause filters

1 year ago, by Andrew in Network Scanner Forum

That's a known issue with the filters. Basically when filters were first introduced, they were single-clause and so was the mechanism that manages them. Later on, the filters were expanded to multi-clause, but the managing mechanism essentially only works with single-clause filters. Thanks for drawing our attention to this, we will probably redesign the filtering system to allow editing the fi