Show all posts by user
12 years ago, by Andrew in Network Scanner Forum
Of course, it's right there
12 years ago, by Andrew in NetWorx Forum
Unfortunately I have no control over and cannot fix this issue as it's caused by a third-party driver NetWorx uses. There is a workaround though: 1. Backup your usage. 2. Uninstall NetWorx. 3. Reinstall NetWorx with the Install LAN traffic filtering driver option unticked. 4. Install WinPCap if you need to filter out local traffic. Restart NetWorx and choose your network adapter marked
Problem with v 5.2.7 and TL-PS310U printer server
12 years ago, by Andrew in NetWorx Forum
Try the following: 1. Backup your usage. 2. Uninstall version 5.2.2. 3. Install version 5.2.7 with the Install LAN traffic filtering driver option unchecked. 4. Install WinPCap and restart NetWorx. 5. Now select your adapter in the drop down list. It will be marked as "Ignore local traffic".
12 years ago, by Andrew in NetWorx Forum
Is this all connected as follows? <USB dongle> - <Your Computer with Connectify> - <Another computer accessing the Internet via your computer> If so, selecting the USB dongle should really work. Try selecting the actual 3G device, rather than "All dial-up connection".
Can't enter router IP addresses with more than 2 digits
12 years ago, by Andrew in NetWorx Forum
This is quite strange. I was reported a similar case, however it remains unreproducible and a mystery. Have you got any third-party Windows shell or skins installed, or something like this?
Network per day, month usage report problems
12 years ago, by Andrew in NetWorx Forum
Martin, you need to go to the NetWorx main settings and choose your wireless adapter under Monitored Interfaces. You should be able to figure out which one is your wireless adapter by looking at their names.
Network per day, month usage report problems
12 years ago, by Andrew in NetWorx Forum
Make sure you have chosen the correct network interface to monitor.
Re: Incorrect "Last Seen" data - fixed
12 years ago, by Andrew in WiFi Guard Forum
This bug has been fixed in the latest builds. You can download a fresh copy and install over your existing one. Then click the Forget button against those devices with incorrect dates. They'll have a correct date whenever they are discovered again.
12 years ago, by Andrew in Network Scanner Forum
Most likely your ISP has implemented AP isolation so clients can't communicate any longer.
Other applications can no longer read database
12 years ago, by Andrew in NetWorx Forum
Since version 5.2.3 the database mode has changed from a rollback journal to WAL (this wasn't mentioned in the change log). Older versions of SQLite access libraries may not be able read a WAL-mode database. I suggest that you download a copy of SQLiteSpy. If it opens the database OK and reads the tables, then it means the database is fine and you may need to update your VB.NET access l
Can't find this so called "toolbar" option?
12 years ago, by Andrew in NetWorx Forum
No worries I will change the wording in the installer to emphasise that an empty area needs to be clicked.
Can't find this so called "toolbar" option?
12 years ago, by Andrew in NetWorx Forum
Are you using the installer or the portable version? The toolbar is only available with the installable version. Also you need to click an empty area on the taskbar, not the icon. See here for more details.
12 years ago, by Andrew in WiFi Guard Forum
Most likely it's a bug, but I need to see a screenshot of this happening. If possible, please take a screenshot and post it here.
WiFi Guard does not see wireless devices
13 years ago, by Andrew in WiFi Guard Forum
It seems that in case if the AP isolation is turned on, devices can only connect to the Internet and cannot communicate with each other. In this case the WiFi Guard presently won't be able to detect these devices. I however have an idea how to detect such devices by asking the router about them. Not every router supports this, but I guess it still could help some users.
WiFi Guard does not see wireless devices
13 years ago, by Andrew in WiFi Guard Forum
It's hard to tell, possibly there is some sort of firewall in the router blocking the communication between hardwired and WiFi-connected devices. Can you, for example, ping the wireless laptop's WiFi address?
RE: Re-remember a forgotten MAC address
13 years ago, by Andrew in WiFi Guard Forum
It will be re-added once that device is detected on the network again.
RE: Request: sort devices automatically after scan
13 years ago, by Andrew in WiFi Guard Forum
Done in the latest build. Please download a fresh copy and it will retain your sort order
Ignore Local Traffic + All Connections-only option for auto start in user acct
13 years ago, by Andrew in NetWorx Forum
All Praxis is suggestingis the SpeedMeter may be easier to measure the speed or volume as you can reset/restart it anytime. Obviously it uses the same method as other components of NetWorx.
Ignore Local Traffic + All Connections-only option for auto start in user acct
13 years ago, by Andrew in NetWorx Forum
The difference may be caused by what's called protocol overhead or the fact that there was actually some background traffic. It also seems that SF thinks there is 10000000 bytes in a megabyte. In either case, it's not guaranteed you will get a reading matching your ISP's records. Up to a 10% difference is normal.
Ignore Local Traffic + All Connections-only option for auto start in user acct
13 years ago, by Andrew in NetWorx Forum
When All Connections is selected NetWorx merely queries the number of received and sent bytes on all available adapters and sums it all app. Generally it's not recommended to use this option as it likely to include virtual adapters that you don't want to monitor. This could double or triple the usage or otherwise give incorrect readings. When the Ignore LAN checkbox is ticked, as I said the sel
"Ignore Local Traffic" with "All Connections" only option for auto-start in user account
13 years ago, by Andrew in NetWorx Forum
It is hard to tell what's happening in your system. We also don't have MS Vista for tests due to its insignificant market share. Now, if we install WinPCap latest version (allowing it to start automatically) and NetWorx, it all works correctly without administrative privileges or elevation. Here I have opened NetWorx settings after a reboot: As to why the interface selection changes to A
Beautiful application but crazy results
13 years ago, by Andrew in NetWorx Forum
If you want to get it working, please follow my or Praxis' advice. As I said, there can be virtual or tunelling adapters, not shown in the Control Panel but affecting NetWorx calculations.
Beautiful application but crazy results
13 years ago, by Andrew in NetWorx Forum
You just need to choose ONE specific network interface to monitor in the settings. As installed NetWorx is monitoring all traffic on all network interfaces, possibly including local traffic or multiple adapters including virtual and dial-up ones and sums it all up. This might have resulted in incorrect readings.
View a line as a Record and permit copy info to clipboard
13 years ago, by Andrew in Network Scanner Forum
Added in the latest build. Choose Properties from the pop-up menu. There is also a pop-up menu to copy or save the items.
13 years ago, by Andrew in Network Scanner Forum
1. No, because typically there won't be a computer's IP address and external tools will be useless. 2. No, but you can import a list of computers via File - Import and then select them all and send to the WOL manager.
13 years ago, by Andrew in Network Scanner Forum
We have made it possible to select several groups at once (holding Ctrl). You can download the latest build with this feature here.
System process uses 15% CPU while running NetWorx
13 years ago, by Andrew in NetWorx Forum
Most likely with network card drivers, but try to choose a specific network connection in the main NetWorx settings (rather than one of those All **** Connections).
13 years ago, by Andrew in Network Scanner Forum
It's already there See the screen shot below: