start two instances

It would be possible to start two instances in contemporary of Networx?
I currently start the portable version and the normal, just renaming the .exe, but I could use on both the applications "ignore local LAN traffic".

Sorry for my English.

Generally two or more portable instances work well.

What do you need the two instances for?

I would need two normal instances to be able to monitor my two wireless networks with daily or weekly limit of data traffic.

Then I recommend to have two portable instances in different folders. Each can be set to monitor a specific network only.

Yes, but I need the software to ignore the traffic generated internally to the local network, and that can only do the normal installation.

This may be more difficult then. By saying you have two wireless networks, do you mean:

1) Two wireless networks to which you connected with two wireless cards at the same time

or

2) Two wireless networks to which you connect separately (one or the other) with one wireless card.

Currently:
a wireless network is monitored with networx normally installed and synchronized with several other computers;
the other network is monitored with the portable version.
Both software are started automatically with the operating system.
The second network did not discriminate between the traffic generated in the WAN and the Web.

I apologize again for not being able to express myself well in this language and having to resort to an automatic translation software.

I forgot to answer your question: the second type.

If I understand you correctly:

• One network differentiates LAN and Internet traffic
• The other network does not differentiate traffic
• These networks are accessed with one WiFi card

Then your way to go will be having an installed version and a portable instance.

Configure the installed instance to ignore LAN traffic and to be only active when connected to network A.
Configure the portable instance to monitor your WiFi card and to be only active when connected to network B.

You will also need to make sure that the portable instance starts after the installed instance (possibly by launching it manually).

I need this too for Monitoring 2 WAN Interfaces on my Router over SMTP is this possible ?

greets Pr0vieH

Use two independent portable instances.