How to add custom IP address range

Started by Steven

Steven

How to add custom IP address range   14 March 2021, 16:37

My home network has several IP ranges:
192.168.1.1 - 192.168.1.255
192.168.2.1 - 192.168.2.255
192.168.3.1 - 192.168.3.255
How do I add these?
Currently, WiFi Guard is only scanning the range the workstation is in.
SoftPerfect Support forum - Ann avatar image
Ann

Re: How to add custom IP address range   14 March 2021, 16:47

You can configure a custom IP range for scanning on the Advanced tab in Settings, as shown in the screen shot below. Enter your range as 192.168.1.1-192.168.3.255, and WiFi Guard should be able to scan all those IP addresses.

Please note that if you have a router between those subnets, WiFi Guard will be unable to detect devices in other subnets or track their MAC addresses, because the ARP traffic cannot pass across subnets through a router.

SoftPerfect support forum

Reply to this topic

Sometimes you can find a solution faster if you try the forum search, have a look at the knowledge base, or check the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • Write in English. If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

 **      **   *******   **      **  **      **  **     ** 
 **  **  **  **     **  **  **  **  **  **  **  **     ** 
 **  **  **         **  **  **  **  **  **  **  **     ** 
 **  **  **   *******   **  **  **  **  **  **  **     ** 
 **  **  **         **  **  **  **  **  **  **   **   **  
 **  **  **  **     **  **  **  **  **  **  **    ** **   
  ***  ***    *******    ***  ***    ***  ***      ***    

Message: