Blocking everything else exept preconfigured MAC address

Started by icrash.iburn

Blocking everything else exept preconfigured MAC address   22 August 2013, 16:16

Hi! is it possible to block everything else from connecting to the internet except those list of MAC addresses that i configured with bandwidth allocations?
SoftPerfect Support forum - Andrew avatar image

Blocking everything else exept preconfigured MAC address   22 August 2013, 16:34

Yes, it is. Just add a blocking rule at the end of the ruleset, something like this:
Source: 192.168.0.1 - 192.168.0.255 (your LAN range)
Destination: Any
Protocol: TCP/UDP
Rate: Blocked

Blocking everything else exept preconfigured MAC address   22 August 2013, 20:48

Hi,

My current setup is via MAC address which roughly around 15 users & has rule for each applied. So this one to be added as a new rule right? I will try it later today thanks a lot.

Source: 192.168.0.1 - 192.168.0.255 (your LAN range)
Destination: Any
Protocol: TCP/UDP
Rate: Blocked
SoftPerfect Support forum - Andrew avatar image

Blocking everything else exept preconfigured MAC address   22 August 2013, 20:59

Yes, and it must be the last rule.

Sometimes you can get the answer faster if you try the forum search and/or have a look at the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

  *******   **     **  ********   ******   **    ** 
 **     **  ***   ***  **        **    **  ***   ** 
 **     **  **** ****  **        **        ****  ** 
  ********  ** *** **  ******    **        ** ** ** 
        **  **     **  **        **        **  **** 
 **     **  **     **  **        **    **  **   *** 
  *******   **     **  ********   ******   **    ** 

Message: