hi
i have a windows 2003 server with 2 nics and rras doing natting. this server is also a squid proxy server. The rule configuration is:
Protocol: TCP/UDP
Direction: Both
Rate: 10 KB/s
Source: 10.10.7.60-10.10.7.200
Destination: Any IP Address
Interface: LAN
This configuration is not working. also tried the second example:
Protocol: TCP/UDP
Direction: Both
Rate: 10 KB/s
Source: 10.10.7.60-10.10.7.200
Destination: local host : 3218
Interface: LAN
does not work either. also change the interface to WAN but didn't work. the only way it works is selecting any ip any port in source and destination, but this is not what we want.
hope you can help me.
thanks
SoftPerfect Bandwidth Manager
Excluding local network
Started by ludovic lugo
ludovic lugo
Excluding local network 25 January 2014, 06:17 |
|
Re: Excluding local network 25 January 2014, 13:09 |
Admin Registered: 18 years ago Posts: 3 537 |
Are there any other rules above this one? It would be great, if you could post a screen shot.
Alternatively create a rule like you did
After that in the main view you should see individual IP addresses dynamically emerging under this rule. They may not be what you expect, i.e. not in the 10.10.7.60-10.10.7.200 range.
Alternatively create a rule like you did
Protocol: TCP/UDP Direction: Both Rate: 10 KB/s Source: Any IP Address Destination: Any IP Address Interface: LANand then in its advanced settings change the Tracking mode to IP address: Own rate limit and quota for each source.
After that in the main view you should see individual IP addresses dynamically emerging under this rule. They may not be what you expect, i.e. not in the 10.10.7.60-10.10.7.200 range.
ludovic lugo
Re: Whole range ip not working 28 January 2014, 06:44 |
|
Re: Whole range IP not working 28 January 2014, 18:27 |
Admin Registered: 18 years ago Posts: 3 537 |
ludovic lugo
Re: Whole range ip not working 28 January 2014, 22:36 |
|
Re: Whole range IP not working 29 January 2014, 10:53 |
Admin Registered: 18 years ago Posts: 3 537 |
ludovic lugo
Re: Whole range IP not working 31 January 2014, 00:24 |