Setting priority for VoIP traffic

Started by Peter

Peter

Setting priority for VoIP traffic   22 July 2019, 09:42

Good day

I own 5 Bandwidth Manager licenses for version 3.2.4. I want to set up a QOS for VoIP. I have 50 PCs on a 200 Mbit line. Can I create a rule that gives priority to VoIP for all 50 PCs?

Yours sincerely
Peter
SoftPerfect Support forum - Ann avatar image
Ann

Re: Setting priority for VoIP traffic   22 July 2019, 11:01

While Bandwidth Manager doesn't support prioritisation, you may be able to handle all VoIP traffic in a separate rule with unlimited bandwidth.

You could try making a rule like this and placing it at the top of your ruleset (it has to be the first rule):
Source: IPv4 Range: 192.168.100.1 - 192.168.100.254
Destination: Any
Rate: Unlimited
Protocol: IPv4 based
In the Add/Edit Rule window for the rule, go to Advanced tab, click "Even more advanced settings", and then tick VoIP in the DPI Matching section. The rule should now handle VoIP traffic, while everything else will be handled by subsequent rules.

Reply to this topic

Sometimes you can find a solution faster if you try the forum search, have a look at the knowledge base, or check the software user manual to see if your question has already been answered.

Our forum rules are simple:

  • Be polite.
  • Do not spam.
  • Write in English. If possible, check your spelling and grammar.

Author:

Email:

Subject

A brief and informative title for your message, approximately 4–8 words:

     

Spam prevention: please enter the following code in the input field below.

 **     **        **  **     **  **     **  **     ** 
 **     **        **   **   **   **     **   **   **  
 **     **        **    ** **    **     **    ** **   
 **     **        **     ***     **     **     ***    
 **     **  **    **    ** **    **     **    ** **   
 **     **  **    **   **   **   **     **   **   **  
  *******    ******   **     **   *******   **     ** 

Message: