Show all posts by user

Re: VMware installer fails if tmp/temp is on a ramdisk

4 years ago, by rocket777 in RAM Disk Forum

QuoteAndrew Is there a chance you have run out of disk space? Ahhhh, that could be it! I tried this on my laptop that has 890MB free in the ramdisk and is an NTFS filesystem. On this smaller system, I'm still using version 3.4.7 not the one I purchased a license for. I've enclosed the VMware error log for you if it helps. The text "error" does appear, a dozen times or so. I'm good

VMware installer fails if tmp/temp is on a ramdisk

4 years ago, by rocket777 in RAM Disk Forum

This is more of a FYI in case anyone else has this problem. I needed to update my VMware application to the VMware-player-15.5.2-15785246 version. When I tried, the installer failed. It turned out it does not like temp and tmp pointing at the ramdisk. Probably doesn't like it pointing anywhere other than the usual spot. After I relocated tmp/temp back and rebooted, I could install the latest VM

Re: No file system on the RAM drive

4 years ago, by rocket777 in RAM Disk Forum

Although I haven't seen it re-occur since those 2 times, I turned off the HDD emulation. The only downside I can see is that I can't test it's speed with HDtune, as it doesn't show up in their device list. But that's no biggy as I only used that for bragging rights, to say how fast my disk was Is exFAT completely compatible? Can I have arbitrarily big size files? I thought the FAT/FAT32 variet

Re: No file system on the RAM drive

4 years ago, by rocket777 in RAM Disk Forum

I've just started getting a similar problem. In the past 2 days, twice on reboot, I would find some of my startup programs would die because the temp directory is not on my A: ramdisk. I run several programs at boot time which create a few dozen temp files, and so they end up sprinkled on my desktop. I had not had any problems for months until just recently. I believe it likely started with las

Re: Bluescreen after installing version 4.0.9 - Resolved

5 years ago, by rocket777 in RAM Disk Forum

Thanks for the link. It's been about 3 weeks without a problem. I'll save your older version, but I'm not having any issues. It must have been a problem with the VWware changes I made. Rock solid so far. As long as it ain't broke I won't need to fix it. I'll keep the older version in case something does happen. Thanks again.

Re: Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

It just occurred to me that with fixing my VMware bridge issue, I won't have to switch to nat and back. So if indeed there's a conflict there, I should not have to do that again, and perhaps not have any more issues. I would like to make one last suggestion (I promise) : to have a setting to disable the threading code that's been added recently. If I do get another crash, I could then check if

Re: Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

Sorry, 3.4.7 I was being sloppy, really just trying to distinguish between the free and paid versions, since the paid version has a change to deal with large ramdisks working in a version later than 1803. I'm running that version now. As for trial versions, I ran it for about 30 minutes and figured it looked so much like my 3.4.7 version that not too much would have changed and it appeared to w

Re: Bridge mode for VMware Windows 8

5 years ago, by rocket777 in Network Scanner Forum

Found it by trial and error. It seems that after I had installed wireshark on the host, VMware was setting the bridge to use the npcap loopback adapter. My other VMs didn't have that checked off, and worked in bridge mode, so I just tried the same for it. And it works, now the Network Scanner sees this VM.

Bridge mode for VMware Windows 8

5 years ago, by rocket777 in Network Scanner Forum

I have a VMware (player 7.1.1) virtual machine running Windows 8.0 inside it. The host is Win 10 1803. For quite a while, it worked in bridge mode, and would get an IP address on my LAN. But lately, and I don't know what has changed other than updates of the Windows 10 host, I resume it or even shut it down and restart it and Win 8 complains that it has no IP address. Once in maybe 10 reboots o

Re: Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

I also downloaded the WhoCrashed program, and it has this to say: QuoteWhoCrashed On Sat 7/20/2019 5:30:47 PM your computer crashed or a problem was reported crash dump file: C:\Users\xxxxxxx\Desktop\ramdisk stuff\072019-5421-01.dmp This was probably caused by the following module: spvve.sys (0xFFFFF8024FDC56E5) Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8024FDC56E5, 0xFFFFB280499A03A0, 0x0) Er

Re: Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

I guess I didn't actually send the minidump to microsoft, but to something called the microsoft community, but I got this response: Quotemicrosoft community Hi, The process that crashed was the IAStorDataMgrSvc.exe : Owning Process ffffb609bd18f080 Image: IAStorDataMgrS The IAStorDataMgrSvc.exe is a component of the Intel Rapid Storage Technology (Intel RST) driver so there may be a clash b

Re: Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

Ok, as you suggested, I just completed the Windows memory test, which I set for the advanced mode. It ran overnight with no errors. I've run this before, when I bought the second 16GB ram about 2 months ago and tested it through the night then as well. (I've now got the crash dump tool installed. How did you find that message about memory errors?) When I couldn't run the v3.7 ramdisk with 22

Re: Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

Do you know how to force a minidump so I can see if I get these errors with the old ramdisk. What tool did you use to see those memory errors? Is it something I can use easily? I want to uninstall the latest version and reinstall 3.7 which I've used for nearly a year without a problem. If that too reports these errors, then I'll believe it's my hardware. Otherwise, the timing of the new driver

Bluescreen after installing version 4.0.9

5 years ago, by rocket777 in RAM Disk Forum

I just purchased the latest version of RAM disk (4.0.9), installed, was running for about an hour and got a blue screen. First one in a very long time, so.... I have a minidump file, I see that spvve.sys is on the stack (as reported by nirsoft's minidump analyser). That's as much as I can see. I found in google search that indicates this is from SoftPerfect RAMdisk and it said to upload the minidu