IPv4 ranges vertically truncated after restart

Hi,
I might have found a small glitch. Steps:

1. Add at least three IPv4 addresses using the green '+' button.
2. Hit Scan, wait for the scan to complete.
3. Exit the program using File - Exit, or 'X' of the main window.
4. Launch the program again.

The multiple IP ranges added in step 1 are now vertically truncated and only display one IPv4 range.
This may happen with other types of IP ranges, but I only use IPv4, so I haven't been able to test that.

If you then go on to click the green '+' button or resize the window, the vertical space will be restored. I've noticed that does not happen all the time - it seems to be related to the window size and maybe position too.

For your info, I'm at 4k and 150% scaling on Win10x64. Let me know if I can help any further with it.

Hope this helps and you guys are keeping safe.

Best Regards,
Jake

Update:

I've spent the morning opening and closing NetScanner and checking the View - Width value in netscan.xml (line 1234) trying to get a reproducible test case for you. I found that it is related to the width of the program window and that there is no need to run a scan to produce this behaviour. If I set the View - Width parm to >= 2238 then the behaviour occurs.

Running the application, resizing the window width >= 2238 (I assume pixels is the unit in the xml), then closing and re-opening produces the issue (for me). The window's height does not seem to matter.

So my updated steps are:

1. Start the program, add three IPv4 ranges.
2. Resize the window width to >= 2238.
3. Close the program, then open again.

Let me know if I can help any more.

That's done it, thank you.