The Duplicate IP Addresses feature always displays 0.0.0.0 for the subnet mask. Please see the picture below.
I am using a DLink DUB-E100 USB 2 Ethernet adapter. The function itself works in the software, but displays wrong. My subnet is 255.255.255.0 (see picture).
We are running WinPCap v4.1.3.
Windows 7 Enterprise SP1, Network Scanner v7.1.6
SoftPerfect Network Scanner
Duplicate IP addresses and 0.0.0.0 subnet mask
Started by Jason
Jason
Duplicate IP addresses and 0.0.0.0 subnet mask 06 December 2018, 13:25 |
Re: Duplicate IP addresses and 0.0.0.0 subnet mask 06 December 2018, 13:45 |
Admin Registered: 10 years ago Posts: 893 |
We have seen a similar behaviour with Win10Pcap. It looks like for some adapters (or in some circumstances) the WinPCap library doesn't return the network mask. Instead it returns an empty string, which is the 0.0.0.0 that you see.
The Network Scanner has an in-build workaround: if it is unable to get the netmask, it uses the default value of 255.255.255.0. That's why it works, though the display is incorrect. To be sure, we have retested it in a clean Windows 7 installation with WinPCap 4.1.3 and it worked as expected, which you can see in the screen shot below:
The Network Scanner has an in-build workaround: if it is unable to get the netmask, it uses the default value of 255.255.255.0. That's why it works, though the display is incorrect. To be sure, we have retested it in a clean Windows 7 installation with WinPCap 4.1.3 and it worked as expected, which you can see in the screen shot below:
Jason
Re: Duplicate IP addresses and 0.0.0.0 subnet mask 07 December 2018, 10:49 |
Our IM department sends this installation as a package to my machine. Netscan and WinpCap are automatically installed. What I found regarding the subnet mask being 0.0.0.0 in the duplicate IP address detection was that I had Win10pCap already installed prior to the package installation. So I guess maybe those two packages were conflicting if they were both installed. After uninstalling Win10pCap, the issue of the 0.0.0.0 subnet is gone.
I had done some further testing with only Win10pCap installed, and the issue came back, so it appears be a Win10pCap issue.
I also tried the new NpCap (per the update on WinpCap website) configured for WinpCap compatibility mode (selected at installation), but that did not work. The adapter list was blank. No message from the software WinpCap wasn't installed.
Thanks for your support,
Jason
I had done some further testing with only Win10pCap installed, and the issue came back, so it appears be a Win10pCap issue.
I also tried the new NpCap (per the update on WinpCap website) configured for WinpCap compatibility mode (selected at installation), but that did not work. The adapter list was blank. No message from the software WinpCap wasn't installed.
Thanks for your support,
Jason
Re: Duplicate IP addresses and 0.0.0.0 subnet mask 10 December 2018, 13:40 |
Admin Registered: 18 years ago Posts: 3 519 |
It is unfortunately unclear why the list was blank when using Npcap in WinPCap compatibility mode. Nonetheless we've just updated the Network Scanner so it can use Npcap directly, without the compatibility layer. Here is a screen shot of Npcap on Windows 7 x64 without WinPCap compatibility enabled:
The preliminary build can be downloaded here.
The preliminary build can be downloaded here.