Do you have any plan to support AVM Fritz!Box that uses the DSL forum's UPnP TR-064 protocol?
There are opensource libraries available: I'm using fritzconnect on Linux box and it works fine. Documentation is available here: https://avm.de/service/schnittstellen/
Thanks,
Alessandro
SoftPerfect NetWorx
Fritz!Box router support
Started by Alessandro Del Prete
Alessandro Del Prete
Fritz!Box router support 18 April 2020, 03:39 |
Re: Fritz!Box router support 18 April 2020, 10:22 |
Admin Registered: 18 years ago Posts: 3 519 |
I have taken a look at the fritzconnection scripts and TR-064 overview. Most of those functions seems to be for querying and setting router configuration. That's not something NetWorx can use: for bandwidth monitoring we only need the router's upload/download stats.
These are retrieved via UPnP's WANCommonInterfaceConfig service under router monitoring.
These are retrieved via UPnP's WANCommonInterfaceConfig service under router monitoring.
Alessandro Del Prete
Re: Fritz!Box router support 18 April 2020, 22:24 |
Re: Fritz!Box router support 19 April 2020, 21:58 |
Admin Registered: 18 years ago Posts: 3 519 |
Well, the charts look very nice, but all this data is based on polling the router statistics once a second and storing the numbers.
NetWorx should give you all the same information (except the Connection Status and Uptime) if you monitor your router via UPnP.
I'm afraid I don't quite understand you. What exactly do you want NetWorx to do?
NetWorx should give you all the same information (except the Connection Status and Uptime) if you monitor your router via UPnP.
I'm afraid I don't quite understand you. What exactly do you want NetWorx to do?
Alessandro Del Prete
Re: Fritz!Box router support 24 April 2020, 22:21 |
Re: Fritz!Box router support 24 April 2020, 22:34 |
Admin Registered: 18 years ago Posts: 3 519 |