- I have the meter displaying average in MB. I tried to save/export the data. The numbers are... very different. Also different from the max and from the Mbits. What am I missing?
- Have been running the schedule since the 24th. Seems to have stopped adding lines to the list yesterday at 6AM. Is there some max number of lines?
SoftPerfect NetWorx
Speed Meter exported data units. Scheduled speed tests stopping
Started by Helen
Helen
Speed Meter exported data units. Scheduled speed tests stopping 03 May 2018, 12:04 |
Two issues here:
Re: Speed Meter exported data units. Scheduled speed tests stopping 03 May 2018, 12:07 |
Admin Registered: 18 years ago Posts: 3 519 |
1. The figures exported from the Speed Meter to a file are either bytes/sec or bits/sec, depending on what you set in Settings - Graph - Transfer Rate Unit. In other words, the values are plain values, not converted to KB or MB. If you divide by 1024 twice, you will get the same number as displayed. The reason the values are not converted is to enable charting, say if you wanted to build a MS Excel diagram, you would need the plain numbers.
2. There is no limit on the number of lines, but it looks like a speed test may occasionally get stuck and new tests don't run. We haven't found yet under what circumstances it occurs, though one issue was fixed in version 6.1.1 - you may like to update if you are using an older version. Otherwise you can simply restart NetWorx and the tests should resume.
2. There is no limit on the number of lines, but it looks like a speed test may occasionally get stuck and new tests don't run. We haven't found yet under what circumstances it occurs, though one issue was fixed in version 6.1.1 - you may like to update if you are using an older version. Otherwise you can simply restart NetWorx and the tests should resume.
Helen
Re: Speed Meter exported data units. Scheduled speed tests stopping 03 May 2018, 22:22 |